Disc Feeder

Disc Feeder

Product Introduction

A traditional continuous feeding equipment for powder material

Capacity

0~88.4t/h

Product Improvement

Install speed adjustment motor according to need; control feeding volume by adjusting the rotation speed of disc

Advantages

  • Stable working and easy operation
  • Wide application, energy saving and efficient
  • Large bearing capacity and stable operation
  • Simple structure; even feeding; convenient maintenance; the best choice for feeding process of powder materials

Work Principle

Bulky materials entering into the cylinder from the hopper accumulate by itself weight on the disk. The natural angle of material is controlled on the disk by adjusting the gap between the sleeve and disc. When the disk rotates, the materials are scraped into accepted hopper by unloading knife, so with the continuous rotation of the disk, the materials are fed evenly. Adjust the gap between the unloading knife and the disk to control the feeding volume.

Product Application

It is applicable to feed non viscous material, but not suitable for powder materials with good flow ability. The suitable feeding material: powder, granular or small bulk materials such as coal powder, cement, clinker, limestone, clay, gypsum, slag etc.

Technical Parameters

TypeModel Disc diameter(mm) Rotation speed of disc(r/min) Max feeding particle size(mm) Capacity(t/h) Motor model Motor power(kw) Weight(kg)
Enclosed hanged YG300 300 10.0 20 0-1.8 Y80L-4 0.55 115
YG400 400 10.7 20 0-2.6 Y90L-6 1.1 120
YG500 500 10.7 20 0-3.3 Y90L-6 1.1 124
YG600 600 10.0 20 0-5.0 Y90L-6 1.1 130
YG800 800 9 30 0-8.0 Y90L-6 1.1 195
YG1000 1000 9 30 0-12 Y90L-4 1.5 263
YG1500 1500 7 40 0-22 Y132M2-6 5.5 755
Open hanged DK600 600 7.53 25 1.8-3.9 Y90L-6 1.1 410
DK800 800 7.53 30 3.5-7.6 Y90L-6 1.1 600
DK1000 1000 7.50 40 1.8-16.7 Y100L-6 1.5 800
DK1300 1300 6.5 50 4.3-27.9 Y132S-6 3 1110
DK1600 1600 6 60 7.03-48.6 Y132M1-6 4 1980
DK1800 1800 5 70 9.26-60 Y132M2-6 5.5 3070
DK2000 2000 5 80 13.6-88.4 Y132M2-6 5.5 3260